Your cart is empty
Enjoy peace of mind and reduce downtime with the Enterprise Shield Plus Protection Plan for Matrice M300 RTK from DJI. The Matrice M300 RTK is not only a considerable investment, but it is likely an integral tool for your business or occupation that you can't be without for extended periods of time. This protection plan from DJI is designed to repair/replace your Matrice M300 RTK in case of accidental damage. DJI offers free and unlimited repairs/replacements, but the cost of each repair/replacement will be deducted from the total amount of coverage purchased. (e.g., If $10,000 in coverage is purchased, and services cost $2,000, then $8,000 of coverage will remain.) Purchased coverage lasts for one year or until coverage amount has been exhausted. Note that coverage can be pooled and shared amongst multiple components that are bought and activated at the same time. (e.g., If plans for two devices are purchased for a total of $40,000 in coverage at the same time, then that total amount can be used by either device, or both, as needed). Please note that a separate plan must be purchased to cover cameras/gimbals.
With Enterprise Shield Plus, DJI will replace your Matrice M300 RTK due to any one of the following causes:
• User/Pilot Error
• Signal Interference
• Water Damage
• Drop Damage
Enjoy peace of mind when flying important missions with this Matrice 300 Commercial Quadcopter with RTK & Enterprise Shield Plus Kit from Dynnex Drones. This kit includes a DJI Matrice 300 RTK commercial quadcopter, two TB60 flight batteries, a BS60 battery station, and an Enterprise Shield Plus protection plan. The Matrice 300 RTK is a ruggedly constructed drone meant to fly critical missions for commercial industries, as well as search and rescue for firefighting and law enforcement. Staying in the air as long as possible is essential in these situations, and each of the two batteries gives the drone up to 55 minutes of flight time. The hard-shell BS60 battery station ensures they stay charged, with the ability to recharge up to eight TB60 flight batteries and up to four WB37 remote batteries simultaneously.
Such a costly tool and important investment should be protected, which is where the Enterprise Shield Plus plan comes in. Having it gives you the ability to receive up to two replacements per year in the event of an accident, even pilot error. Replacements require an additional nominal fee, but shipping via local freight is free. Shield Plus helps ensure that you always have the Matrice 300 RTK at the ready to assist you when the need arises.
Ideal for industrial, commercial, and rescue operations, the Matrice 300 Commercial Quadcopter with RTK from DJI features a built-in RTK (Real-Time Kinematic) module that helps the drone withstand magnetic interference from metal structures for a more stable flight. RTK support also provides the possibility of extremely accurate positioning data with an optional D-RTK 2 GNSS mobile station. The Matrice 300 RTK is also rated IP45 for rain and dust resistance, and it is engineered to withstand temperatures from -4 to 122°F.
This kind of durability can be utilized in firefighting, law enforcement, and inspection of buildings and structures. To accomplish this, the Matrice 300 RTK will need to be provided with a gimbal camera payload (not included). It supports a wide variety of Zenmuse and other third-party devices. When in flight, you can operate the Matrice 300 RTK from up to 9.3 miles away thanks to DJI's OcuSync Enterprise technology and included controller. Fly far and fast, up to 51.5 mph, for up to 55 minutes at a time on a full battery charge (battery is not included). Additional technologies are included to help with obstacle avoidance, course plotting, and more.
When taking on critical missions, your drone must be aware of its place in the environment. This helps achieve the mission while protecting people and property. To achieve this, the M300 RTK is equipped with dual-vision and ToF depth sensors on all six sides. This complete vision has a detection range of up to 131' and can be adjusted via the DJI Pilot app.
Transmit and control the Matrice 300 RTK from up to 9.3 miles away and receive a triple-channel 1080p video feed from the gimbal. For signal stability and security, the Matrice 300 RTK supports dual-band 2.4/5 GHz real-time autoswitching signals and AES-256 data encryption.
When you add a gimbal camera payload to the Matrice 300 RTK, you have three different configurations you can choose from. The drone supports a single downward gimbal, dual upward and downward gimbals, or a triple payload consisting of two downward and one upward oriented gimbal.
Record actions during a mission, such as movement, gimbal orientation, image capture, and zoom, to create a template mission file to automate future inspection flights.
Create up to 65,535 waypoints and set multiple actions at each waypoint for one or more payloads, including third-party devices. You can also plan your flight path to be more efficient in reaching those waypoints.
Helps during automated flights in recognizing the subject of past flights to ensure consistent framing.
A new PFD is provided to the M300 RTK controller that features aviation-grade situational awareness. Flight and navigation information is clearly indicated on the built-in display to keep pilots informed. You can keep tabs on aircraft attitude, altitude, velocity, wind speed, and wind direction. Navigation information includes heading, trajectory, any PinPoint information, and home point location. There's also a separate map to show nearby obstacles.
Allows aircraft and payload operators to switch duties with a single tap if needed.
Maintaining the Matrice 300 RTK requires more than propeller replacement. This integrated system gives you the current status of all systems, notification logs, and a preliminary troubleshooting guide to address any issues. Other essential information, such as flight logs, flight duration, and mileage, are also provided along with tips on how to care and maintain the drone. The system provides this important information throughout the entire life cycle of the drone.
Control and information are provided to the controller's built-in display via a pair of specialized apps. DJI Pilot gives enterprise-level pilots the ability to utilize the full capabilities of the Matrice 300 RTK. DJI FlightHub lets you manage all drone operations and can scale to accommodate larger fleets.
Three different SDKs let you customize the abilities of the Matrice 300 RTK to suit your needs and support a wide variety of third-party devices and applications:
Built-in redundancy systems ensure mission completion Anti-collision beacon
AirSense ADS-B receiver
Zenmuse compatibility: XT2, XT S, Z30, H20, and H20T
The TB60 Intelligent Flight Battery from DJI is an essential accessory for the Matrice 300 RTK, powering the entire drone. It has a 5935mAh capacity and provides you with up to 55 minutes of flight time. To help optimize its performance in colder environments, the TB60 drone battery features a self-heating function that brings it up to its ideal operating temperature.
Charge all your batteries with this BS60 Intelligent Battery Station for Matrice 300 RTK from DJI. This hard-shell case can charge and protect up to eight TB60 flight batteries and up to four WB37 remote batteries with its 12 battery ports. Batteries are intelligently charged via a dual-volt AC plug and built-in circuitry that determines which batteries have the most power. For the top two TB60 and top WB37 battery, the BS60 will charge them first, ensuring you get airborne as soon as possible. Built-in wheels and a telescoping handle let you transport this battery charging station easily to where it's needed most.
Activating the battery station requires an optional USB Type-C to USB Type-A cable to connect it to a Matrice 300 RTK remote controller. Once connected, press the power button and use the DJI Pilot app to activate charging.
• Fully charge a TB60 battery in up to 70 minutes
• Built-in padlock holes for added security with optional padlocks
• Battery station securely closes via two built-in locking clasps
• Built-in carry handle
• Built-in pressure valve
• Air intake and air vent
• Status LEDs
• Firmware updates via USB Type-C
“H” For Hybrid
Multi-sensor payloads that bring a whole new meaning to mission efficiency. The unique intelligence and integrated design provide unprecedented aerial imaging capabilities for a range of commercial drone applications.
Capture everything. Up close or from a distance. In true living color or thermal. An integrated laser rangefinder (LRF) measures the distance to an object at up to 1200 m away. A powerful, integrated payload that unleashes advanced intelligent capabilities for DJI’s industrial drone platforms.
WHAT'S IN THE BOX
DJI Matrice 300 Commercial Quadcopter with RTK
1 x DJI Matrice 300 Aircraft
2 x DJI TB60 Intelligent Flight Battery for Matrice 300 RTK [Limited 6-Month Warranty (Less than 200 Charge Cycles)]
1 x DJI Smart Controller Enterprise
1 x USB Charger
1 x USB Type-C Cable
1 x DJI LiPo Battery Pack for DJI CrystalSky & Cendence (7.6V, 4920mAh)
2 x 2110 Propeller (CW)
2 x 2110 Propeller (CCW)
2 x Landing Gear
1 x Pair of Spare Stick Covers
2 x Spare Propeller Holder
4 x Spare Gimbal Dampers
1 x USB Type-A Cable
1 x Vision System Calibration Plate
1 x Carrying Case
1 x Smart Controller Lanyard
1 x Set of Rubber Port Cover
1 x Installation Hardware
Limited 1-Year Warranty (Flight Controller System, Aircraft Body Excluding Shell, Landing Gear Base & Battery Locker, Smart Controller Enterprise, and USB Charger)
Limited 6-Month Warranty (Propulsion System Excluding Propellers, Transmission Antennas, and Upward/Downward Single/Downward Dual Gimbal Connectors)
Limited 3-Month Warranty (Carrying Case) DJI Enterprise Shield Plus Protection Plan for Matrice M300 RTK
DJI BS60 Intelligent Battery Station for Matrice 300 RTK
1 x Intelligent Battery Station for Matrice 300 RTK
1 x AC Power Cable
1 x Limited 1-Year Warranty
DJI Enterprise Shield Plus Protection Plan for Matrice M300 RTK (1-Year Coverage)
Enjoy peace of mind and reduce downtime with the Enterprise Shield Plus Protection Plan for Matrice M300 RTK from DJI. The Matrice M300 RTK is not only a considerable investment, but it is likely an integral tool for your business or occupation that you can't be without for extended periods of time. This protection plan from DJI is designed to repair/replace your Matrice M300 RTK in case of accidental damage. DJI offers free and unlimited repairs/replacements, but the cost of each repair/replacement will be deducted from the total amount of coverage purchased. (e.g., If $10,000 in coverage is purchased, and services cost $2,000, then $8,000 of coverage will remain.) Purchased coverage lasts for one year or until coverage amount has been exhausted.
DJI Zenmuse H20 cameras are not included in this package. They are used for illustrational and informational purposes only on this product page.
DJI Zenmuse H20T Thermal Camera w/ Enterprise Shield Plus
DJI Zenmuse H20 Multi-Sensor Camera w/ Enterprise Shield Plus